Friday, June 13, 2014

Glass etching with an Air Eraser

Hello all. I hope you're having a wonderful day. This is my Design Team post this month for She's A Sassy Lady.

I will attempt to show you how easy it is to etch glass with an air eraser. It's not hard at all, once you get the hang of it.  Below is just a few of the glasses that I did for my cousin. She and her fiance will be giving these out to the groomsmen, as gifts. #cricut #imadeit
Here's what you need:
1. Air Compressor
2.  Air eraser
3. Aluminum Oxide


Now that you have your supplies, you will need to cut out your pattern on you Die cutting machine. I used my Cameo. I find it best to use vinyl, but some people use clear contact paper. I just can't see what I'm doing with the clear contact paper. You may be able to use a printed or solid contact paper. Play around with it and see what works for you.
  
Once you get the pattern cut out, you will use the negatives and apply to the glasses.
Then you wan to tape off any parts of the glass that you don't want to etch:


 Now here's the setup


You can find list of how to make this homemade cabinet here I got this information from one of the Facebook groups I'm in.  I just decided to change it up a bit and go with the clear plastic instead of the top. I personally think you can see better through the clear plastic. I use clips to hold the plastic in place, or you can use clothes pins. Oh, and you need a face mask for sure. You do not want to breathe in the oxide! I also wear gloves, but many of my friends do not and have had no problems. I also wear goggles.

 I place foil in the bottom of the cabinet to collect my oxide for re-cycling. Yes you can re-cycle, but be weary of debris. 

I used the Paasche Air Eraser kit from Amazon:

Then you fill up the cup on top of the eraser. This is the only frustrating part. The cup is so small, you have to keep filling it up.
*Note this is not my picture, my pictures were lost.


I set my compressor to 75 - 80 PSI.
Then it's time to blast away!!!
It's best to do the erasing in the day time so you can "see" what you have done.
 When finished you want to wash off the excess oxide and remove the tape.
Your vinyl will still be in tack and that's okay. You will began to peel it away once you have all the oxide rinsed off.
End results:
















Thanks for looking and I hope I have encouraged you to try Air Erasing, but fair warning....It is addicting!!





8 comments:

  1. Thank you very much. Wished you could do a video to see your technique on the air brushing part. I bought my AE and oxide and have a compressor, but I'm afraid to try. lol

    ReplyDelete
  2. Girl you know you be jammin now if I can get hubby to make me that box....love them

    ReplyDelete
  3. Looks great Danita! But I want to see a photo of you in your mask & goggles!! :)

    ReplyDelete
  4. Wow - these are awesome! Great insights and awesome projects!

    ReplyDelete
  5. WOW those glasses look great. Air compressor not in my budget right now but will remember

    ReplyDelete
  6. Thank you SO much for taking time to do an actual tutorial! I ordered my air eraser today and have bookmarked this page to refer back to in case I need it. Your projects turned out great and I'm sure we're very well received.

    ReplyDelete
  7. Love it! Just purchased the Air Eraser today! Ever etch on Stainless Steel? I'm going to try it on out Yeti tumblers!!

    ReplyDelete
  8. Hi, I just started air erasing myself. I'm wondering how many CFM the air compressor you're using puts out. My compressor is at .6 and I think that may be too low because it runs out if air quickly, so I can only do one project at a time before it needs to build back up.

    ReplyDelete